CZ 75B accessories

(181 products)

The CZ 75B is the classic steel frame CZ, and it shares many parts with the rest of the CZ 75 family. Whether you want a better grip, brighter sights, a red dot or tuned springs, you can build on it step by step. You can choose original CZ parts and parts from Eemann Tech, Toni System, KMR, LPA, Zendl, Armanov, Angry Bear, Night Fision, EGW, Lok, Outer Impact, Boss Components and Falco.

Accessories by category

Grip, magwell and base pads

The CZ 75B takes the full size CZ grips, the same as the Shadow 2, TS 2 and SP-01. You can choose aluminium, brass, duralumin, G10 or polymer grips, including the CZ retro grips in the style of the original CZ 75. For a magwell, CZ and Toni System make aluminium and brass versions, and Eemann Tech a brass magwell of 87 g. Before you fit a magwell, check the main spring plug. If it has a lanyard loop, replace it with a plug without the loop. With a magwell you also need short grips and magwell compatible base pads, because the factory base pads do not fit into a magwell.

Sights and red dots

The CZ 75B, P-01, SP-01 and CZ 75 Compact share the same sight sets. You can choose adjustable sights from LPA and Zendl, sets from CZ, and tritium sets from Angry Bear and Night Fision for low light. In a "fiber optic A" or "tritium A" set only the front sight has fiber optic or tritium, in a "B" set both sights have it. The factory front sight is 5.5 mm high and fixed with a pin. Zendl makes 5.5 mm front sights with fiber optic in 1.0 mm or 1.5 mm.

The CZ 75B has no Optics Ready cut. A red dot mount from EGW, Toni System or Outer Impact replaces the rear sight in its dovetail. If you no longer need the front sight, the Angry Bear front sight filler closes its dovetail.

Springs and slide stops

Most springs are shared with the Shadow 2 and SP-01, including recoil, main, trigger and sear springs and the Eemann Tech calibration packs. DPM makes a recoil reduction system for the CZ 75B. For a firm support hand, Eemann Tech makes slide stops with a thumb rest for the CZ 75B, SP-01 and SP-01 Shadow.

Small parts and maintenance

Sets of buffers from CZ, KMR and Eemann Tech soften the impact of the slide on the frame. The CZ set contains three thick and two thin buffers. Eemann Tech makes all small pins for the CZ 75B, Shadow 2, TS 2 and SP-01, as single parts or as a set. The slide stop pin lasts about 10 000 shots, and Eemann Tech recommends replacing it about every 8 000 shots to protect the frame. Original CZ spare parts, such as the main spring plug, trigger pin or firing pin block spring, are listed with their part numbers from the user manual.

Holsters

For the CZ 75B you can choose an RH Holsters kydex IWB holster or a Falco leather IWB holster.

Frequently asked questions

Can I put a red dot on my CZ 75B?

Yes. A red dot mount replaces the rear sight in its dovetail. You need no milling. Choose a mount with the footprint of your red dot.

What do I need to fit a magwell to my CZ 75B?

A magwell, short grips and magwell compatible base pads. Check the main spring plug too. A plug with a lanyard loop must be replaced with one without the loop.

Do Shadow 2 grips fit my CZ 75B?

Yes. The CZ 75B, Shadow 2, TS 2 and SP-01 take the same full size grips.